From: Sean Chou (ychou)
Date: Wed Jan 05 1994 - 03:59:23 EST
Forwarded message:
>From sztarkin_at_hamlet.ucdavis.edu Tue Jan 4 14:32:23 1994
Date: Tue, 4 Jan 1994 12:14:38 -0800 (PST)
X-Ph: V4.1_at_ux1.cso.uiuc.edu
From: <sztarkin_at_bullwinkle.ucdavis.edu>
Subject: Re: AT&T KIT, Tp750 AND FAXWORKS
To: Peter Forster <forster_at_ssnet.com>
Cc: Sean Chou <tp750_at_uiuc.edu>
In-Reply-To: <9401032251.AA08339_at_marlin.ssnet.com>
Message-Id: <Pine.3.89.9401041158.A24355-0100000_at_hamlet.ucdavis.edu>
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
X-Charset: LATIN1
X-Char-Esc: 29
On Mon, 3 Jan 1994, Peter Forster wrote:
>
> Well, I can report that this works indeed, but with some restrictions:
> I can only use the DOS modem configuration program (that came with the KIT
> card) if I comment out the socket services line
> DEVICE=C:\THINKPAD\IBM2SS01.SYS /S0=2
> in CONFIG.SYS.
True, I checked, and mine was"REM DEVICEhigh=C:\THINKPAD\IBM2SS01.SYS
/SO=2", but I did not REM it out. I only added 2,2F8,3 to the ...
\FAXWORKS\FMD.SYS statement to set it up on COM2.
> Otherwise it generates a 'Divide Error' and often hangs the
> whole system. If I replace the '/S0=2' parameter with '/S0=1' (don't know
> what that actually does or means), the KIT's config.exe works fine, but the
> COM port is still not recognized (I have the modem card in slot B and use
> 'CONFIG SLOTB COM2'). I do need to load the socket services, however, in
> order to use my IBM PCMCIA ethernet adapter in slot A.
>
My modem is in slot A (the top slot). At my experience level and place
on the learning curve with all this, one card presents enough
complexity. I don't even want to think about two.
> I'm somewhat stuck with this problem and already wanted to call AT&T about it,
> but I can't find their Technical Support phone number anywhere among the things
> that came with it (although it advertises toll-free support on the box). This
> number is probably only printed on the registration card, which I have already
> sent off -- or I only get it after having registered?
The number I have for AT&T Paradyme is 800-237-0016. I couldn't find it on
anything that was sent with the modem either, including the reg. card,
which I had not yet mailed.
Brian K. Tarkington
bktarkington_at_ucdavis.edu
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:52:16 EST