RE: HDD connector info please?

New Message Reply Date view Thread view Subject view Author view Attachment view

From: Don Whiteside (dwhite_at_shadow.net)
Date: Tue Nov 08 1994 - 17:43:03 EST


[stuff about AMP D connector on HDD deleted]
>I do however have the feeling that this was too easy, and therefore
>the phantom part must be the connector *inside* the drive box. Am I
>right? If so, what were the instructions again for opening the drive box?

  First things first... There's three parts to this connector. The AMP D
connector (glad to know it's sourcable - care to post the inventory number
and contact info?), the ribbon-like cable (proper term??) and the 44 pin
connector to the drive. That should be findable. It's the same size as a
standard IDE connector, I believe, but with 4 more sockets.
  Here's the spec from the Seagate tech reference for one of their 2.5
drives:

  ST-9150AG

                              TOP +- 44-pin I/O Connector (* see below)
                                        & o o
                                      ::::::::::::::::::::1 o o
                                 -P-W-A-----------+------------------
                                                  & & &
         pin-20 removed for keying ---------------+ & &
                                                              & &
                                                              & &
   Drive is Master, no Slave drive present ------------------ 0 0
   Drive is Master, Seagate Slave drive present ------------- 1 0
   Drive is Slave to another Seagate 2.5" Master ------------ 0 1
   Reserved Position (Do Not Use) --------------------------- 1 1

   * Drive uses +5vdc power supplied to the drive
     via the interface connector. The drive does
     NOT make use of a +12vdc power line.
     pin-41 +5vdc (Logic)
     pin-42 +5vdc (Motor)
     pin-43 Ground

  Anyways - my Circuit Specialist catalog only lists 40 and 50 pin 0.1x0.1
IDC female socket connectors. However, those are only $1 each in single
quantity, $0.60 ea > 100 quantity. So even if you have to get these made....
not a horrid price, I would think. And SOMEONE is making them....

Second, getting the case open:
  Peel back the little sticker showing where to push down when inserting it
and you'll find two screws. Remove em. Next, the way I did this was to
carefully use a flathead jewler's screwdriver to undo the snaps one by one,
starting at the end with the screws. The case had enough flex for me to bend
it back as I went w/o damaging it. Once you do that, the top flips up and
you're home free.

========================================================================
Donald Alan Whiteside School of Computer Science
Eternal Student Florida International University
    GCS d-- -p+(---) l u+(-) e+ m+ s !n h f g+ w+ t+(++) r- y++
      I am NSA of Borg: your private key will be assimilated.
========================================================================


New Message Reply Date view Thread view Subject view Author view Attachment view

This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:52:28 EST