Re: Megahertz problem.

From: root (root_at_TP_Steve.shosmer.slip.netcom.com)
Date: Fri Jan 20 1995 - 13:15:26 EST

• Next message: Chris Hanson: "two configuration problems"
• Previous message: Duane Spellecacy: "Introduction"
• In reply to: Jon Bauer: "Megahertz problem."

It sounds like you need to issue a mode statement. Your DOS software is
probably not setting up the com port baud rate. Try (depending on your
DOS ver)
        "mode comX: baud=xxxx

Stephen Hosmer
hosmer_at_ibm.net

On Wed, 18 Jan 1995, Jon Bauer wrote:

>
> I've got a kind of strange problem. Maybe someone can help with the
> answer. I have a TP720 (ok, I know it is notthe 720 list, but there is
> no 720 list! this will probably apply anyway) and a Megahertz modem. The
> modem works fine if I 1st go into Windows and access Terminal. I can
> then go back to DOS and run a DOS based terminal program or access the
> modem. If I don't access the modem through Windows first, I can't use
> the modem.
>
> Any ideas? Need further detail?
>
> - Thanx in advance for any help.
> - Jon
>
>
>
>
>

• Next message: Chris Hanson: "two configuration problems"
• Previous message: Duane Spellecacy: "Introduction"
• In reply to: Jon Bauer: "Megahertz problem."

This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:52:31 EST