Re: com1 and com2

From: Mark Bell (bytehead_at_interramp.com)
Date: Fri Mar 22 1996 - 22:05:54 EST

• Next message: John H. Kim: "Smartsuite CD"
• Previous message: William Ng: "com1 and com2"
• Maybe in reply to: William Ng: "com1 and com2"

At 01:56 PM 3/22/96 PST, you wrote:
>I have a TP755CX, I only seem to have com1 active. I think com1 is the
Mwave dsp modem.
>How could I activate com2 so that I can use the RS232 connector at the
back? or TP755CX
>only come with one com port?

You need to use the setup to enable the port, but you also need to disable a
device with the PS2
command. I had this same problem, and I ended up disabling the IR device via
software, and enabling
the RS-232 port via hardware.

#---------------------------------------------------------------------#
# ** Trying to find the meaning of life and our existance, this is ** #
#Mark Bell * 800 College Drive #104 * Vineland, NJ * 08360 *6093274029#
#--------------->Email: bytehead_at_interramp.com<-----------------------#

• Next message: John H. Kim: "Smartsuite CD"
• Previous message: William Ng: "com1 and com2"
• Maybe in reply to: William Ng: "com1 and com2"

This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:52:59 EST