From: Jim Schneider (jschneid_at_cwix.com)
Date: Sun Dec 13 1998 - 22:35:11 EST
This is starting to sound a little like a problem I had awhile back, and flashing the most
current bios seemed to fix the problems, but afterwards I wondered if just doing the
initialize function in the ROM SETUP would have fixed the problem. If it happened to
me again I would try that first because it would be easier.
You would also want to be sure that the jumper on the drive is set for cable-select and
not a secondary or slave drive.
Rob Bell wrote:
> "James H. E. Maugham" wrote:
> >
> > On 10 Dec 98, at 17:10, Bill Morrow wrote in reply to Rob Bell:
> >
> > > or simply pull the NT4 HDD out when using the NT5 bets HDD.. :-)
> >
> > This is the only way I have found to safely do this, at least on my 760XL, and I strongly suggest that Rob do this also.
> >
>
> I would happily do this, except the 770 doesn't boot without the main
> hard drive physically installed. That's why I started this thread, to
> find out how to boot the 770 without the main HD installed.
>
> Thanks,
> Rob
>
> -----------------------------------------
> Rob Bell
> Senior Consultant, CPD Professional
> CSC Consulting, Minneapolis, MN
> rob.bell_at_nospam@csc.com
> -----------------------------------------
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:54:34 EST