From: Mark Lemon (mlemon_at_hickseq.com)
Date: Mon Apr 10 2000 - 19:05:50 EDT
Birger,
2 good ideas, but neither worked! I remember
clicking the box to enable "401" months ago,
but it never changed anything. Disabling it
again doesn't seemed to have helped either.
Also, no signal in into MS Sound Recorder
application unless I put the plug partially out
as described below.
Any other ideas?
Mark
> -----Original Message-----
> From: Birger Petterson [mailto:BirgerPetterson_at_worldnet.att.net]
> Sent: Monday, April 10, 2000 2:49 PM
> To: mlemon_at_hickseq.com; 'TP List'
> Subject: Re: TP, Microphone, and ViaVoice
>
> > Folks,
> >
> > I popped for an Andrea ANC-600 Microphone and
> > picked up a copy of IBM ViaVoice Executive to
> > set up my TP600 for voice dictation.
> >
> > Everything works, but I'm having problems with
> > the jack. I plug blue TP adapter plug into the
> > "mic in" on the side of the TP, then plug the
> > jack into the blue adapter. No signal
>
> Push it in all the way.
>
> > Under Devices, Every Crystal PnP Audio driver
> > is loaded correctly under Sound, video & Game
> > Controllers. No conflicts in Win98, etc. The
> > microphone works properly on another PC.
> >
> > Something's obviously wrong - any ideas?
>
> In device mgr find something mentioning 401 and inactivate it.
>
> Keep in touch.
>
> Birger
>
>
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:55:58 EST