From: David Reid (dwreid_at_hiwaay.net)
Date: Tue Feb 13 2001 - 23:42:05 EST
Paul, the drive I have 'in there' is an IBM 540mb drive for the 360P and
others.
As for the drive being bad . . . I don't understand why it is only bad in
one 360 case, but not another. Perhaps you didn't read that part of my post.
Regards,
----- Original Message -----
From: "Paul Khoury" <pkhoury_at_loop.com>
To: "David Reid" <dwreid_at_hiwaay.net>
Cc: "ThinkPad List" <thinkpad_at_cs.utk.edu>
Sent: Tuesday, February 13, 2001 9:32 PM
Subject: Re: Error codes on 360P
On Tue, 13 Feb 2001 01:15:48 -0600, David Reid wrote:
>Greetings all,
>
>I'm getting the following error codes on a 360P, Easy Setup Hard drive test
>yet the users manual does not state what these codes mean. Could someone
>enlighten me?
>
>red X next to HDD-1
>DEV 017
>ERR 23
>FRU 6010
>
>BIOS is up to date
>
>can pull this drive out and pop it in another 360P and it works fine.
>
What kind of drive do you have in there? It's probably a bad drive, usually
those
codes are for IBM Diagnostic personal (i.e. Easyserve and HelpCenter).
I'd be curious if those error codes are in the HMM also.
Paul
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:56:50 EST