From: Andrew (afgun_at_mediaone.net)
Date: Fri Oct 05 2001 - 20:42:54 EDT
Only after the pointer died. And I just now did it, and it works fine.
But my trackpoint still won't go up and down :(
----- Original Message -----
From: "Bruce Markowitz" <scosgt_at_worldnet.att.net>
To: "Andrew" <afgun_at_mediaone.net>; <THINKPAD_at_cs.utk.edu>
Sent: Friday, October 05, 2001 6:53 PM
Subject: Re: TP600 POST errors
> Did you plug in a PS2 mouse with the machine turned on?
> That can blow out the PS2 port
> ----- Original Message -----
> From: "Andrew" <afgun_at_mediaone.net>
> To: <THINKPAD_at_cs.utk.edu>
> Sent: Friday, October 05, 2001 6:48 PM
> Subject: TP600 POST errors
>
>
> > Howdy. New member Andrew G. here in Michigan.
> >
> > I have a TP600 model 2645-31U
> >
> > I've always had problems with trackpoint creep, but
> > the other day my trackpoint started acting very strange,
> > jumping all over the screen vertically, so I plugged in
> > a mouse and the computer worked normally.
> >
> > Well, next time I went to power it on, I was greeted
> > by an ugly error 08611
> >
> > The built-in tests tell me there's a problem with the
> > systemboard. It says
> >
> > DEV 086
> > ERR 22
> > FRU 0010
> >
> > Any suggestions on what this means? Just that my
> > trackpoint is bad? If I hit escape a few times the
> > laptop will boot, and I still have the same trackpoint
> > problems, but it appears to be OK otherwise.
> >
> > Thanks,
> >
> > --andrew
> >
> >
>
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:57:37 EST