From: Albert C. Lee (alee_at_securefront.com)
Date: Thu Oct 25 2001 - 11:45:11 EDT
Thanks for the tip Eric. Do you know if I need special tools and do I
need to order replacement screws to finish the job? The HHM manual makes
mention of recommending replacement screws.
-Al
On Thu, 25 Oct 2001, Cottrell, Eric wrote:
> Hello,
>
> I guess I am becoming the LCD expert having done a few 8->.
>
> On the LCD in my 365ED there are three or four circuit boards
> in the LCD module. They are connected together by little plugs
> and sockets. I had problems with one getting loose and causing
> the screen to go away. I suspect that is the problem with your
> 600e.
>
> I would grab the HHM pdf for the 600e (09n1033.pdf) and remove
> the lcd front cover. You need to look carefully on the back
> side of the lcd panel for loose connections. Handle the LCD
> panel carefully.
>
>
> On another note I noticed IBM has a matrix for the Hardware
> Maintenance Manuals (HHMs).
>
> http://www-1.ibm.com/servlet/support/manager?rs=0&rt=0&org=psg&doc=MIGR-39298
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:57:40 EST