Re: hard drive ? 755xx

New Message Reply Date view Thread view Subject view Author view Attachment view

From: Bruce Markowitz (scosgt_at_worldnet.att.net)
Date: Sun Oct 28 2001 - 19:07:13 EST

Now wait
what was the original drive, and what is the make of the new drive. All
drives do not jumper the same.
----- Original Message -----
From: "Toni" <cruelpeep_at_yourvillage.com>
To: "Bruce Markowitz" <scosgt_at_worldnet.att.net>; <thinkpad_at_cs.utk.edu>
Sent: Sunday, October 28, 2001 5:46 PM
Subject: Re: hard drive ? 755xx

> Hi Bruce,
> 1.2G in original caddy. ASM p/n 85G8562. i tried drive in an altered caddy
> (pins 59+60 cut) just in case that was the problem. no go.
> thanks, toni
> ----- Original Message -----
> From: Bruce Markowitz <scosgt_at_worldnet.att.net>
> To: Toni <cruelpeep_at_yourvillage.com>; <thinkpad_at_cs.utk.edu>
> Sent: Sunday, October 28, 2001 3:17 PM
> Subject: Re: hard drive ? 755xx
>
>
> > How big is the drive, and what caddy is it in? Did you re-use the
original
> > caddy, and if so, what size was the orginal drive?
> > ----- Original Message -----
> > From: "Toni" <cruelpeep_at_yourvillage.com>
> > To: <thinkpad_at_cs.utk.edu>
> > Sent: Sunday, October 28, 2001 2:08 PM
> > Subject: hard drive ? 755xx
> >
> >
> > > drive was just shipped to me. computer will not boot with drive
> installed
> > > even with bootable floppy. shows the memory installed and then just
> gives
> > a
> > > blinking cursor. easy setup says drive is OK. what's the matter? yes,
> it
> > is
> > > seated correctly.
> > > thanks for any suggestions, toni
> > >
> > >
> >
> >
>

New Message Reply Date view Thread view Subject view Author view Attachment view

This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:57:40 EST