From: Ray Bay (canyonlands_at_theriver.com)
Date: Fri Apr 12 2002 - 13:12:59 EDT
Go to the 3Com web site and download new copies of the driver set.
Then go to Start -> Control Panel -> Modem and delete all modem
references after you determine which com port was being used.
Then go to Start -> Control Panel -> System and look at the devices list
to be sure the modem has been removed.
Then install the drivers, being sure that the modem is installed to the
correct Com port, and note to which director or subdirectory the drivers
are installed.
Then reboot the machine and let it find the modem, after which it will
find the drivers.
If this doesn't work, you probably have a bad modem... the
3Com/USRobotics/Megaherz X-Jack XJ1506 pcmcia modem has a fairly high
failure rate...
Wev162_at_cs.com wrote:
>
> I am setting up my new 760ED running Win95 OSR2 trying to get it to detect
> the modem. I am trying to use a megahertz 56k X2 X-Jack XJ1560J but windows
> will not detect it properly. When I insert the card it says "new hardware
> detected: XJ1506" but when i go to install driver it will not recognize the
> drivers. I know the drivers and modem work because they worked exellent in my
> last laptop. does anybody know how to get this modem work?
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:58:39 EST