From: Bill Morrow (marrow_at_adelphia.net)
Date: Tue Jul 23 2002 - 14:56:43 EDT
no, i am referring to the metal plate with holes on the bottom attached to
the drive by four screws, two on each side..
you can see a picture on my web site, i think..
the black plastic bezel with the audio connector holes and Ir window is NOT
what i refer to..
<------------------------------->
Cordially, :-)
Bill Morrow
WEB page http://thinkpads.com
thinkpads.com Open Forum
http://www.afaonline.com:8080/webboard/$webb.exe/~2/login?
or go to thinkpads.com and link from there
E-Mail: bill at thinkpads dot com
----- Original Message -----
From: "Murray, Pete" <Pete.Murray_at_carlson-europe.com>
To: "Bill Morrow" <marrow_at_adelphia.net>; <THINKPAD_at_cs.utk.edu>
Sent: Tuesday, July 23, 2002 4:49 AM
Subject: RE: T21 with 9.5mm drives
> when you refer to the "bracket" do you mean the one with the holes for the
> audio connectors?
>
> -----Original Message-----
> From: Bill Morrow [mailto:penzance_at_gate.net]
> Sent: Tuesday, July 23, 2002 9:44 AM
> To: Murray, Pete; THINKPAD_at_cs.utk.edu
> Subject: Re: T21 with 9.5mm drives
>
>
> you need a bracket..
> i call it a bracket anyway..
> you can reuse the one on the 32gig drive..
> otherwise, nothing more is needed..
> the screws on the side of the drive serve to locate it when it is mating
up
> with the connector in the drive bay..
> i have them if you need one..
>
> <------------------------------->
> Cordially, :-)
> Bill Morrow
> WEB page http://thinkpads.com
> thinkpads.com Open Forum
> http://www.afaonline.com:8080/webboard/$webb.exe/~2/login?
> or go to thinkpads.com and link from there
> E-Mail: bill at thinkpads dot com
> ----- Original Message -----
> From: "Murray, Pete" <Pete.Murray_at_carlson-europe.com>
> To: <THINKPAD_at_cs.utk.edu>
> Sent: Tuesday, July 23, 2002 4:30 AM
> Subject: T21 with 9.5mm drives
>
>
> > Hello
> >
> > Can anyone tell me if I need a caddy to install a 9.5mm HDD into my
> > T21(currently has 32GB 12.5)?
> >
> > Thanks
> >
>
>
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:59:08 EST