From: Gerry S (gerka_at_pacbell.net)
Date: Sat Dec 07 2002 - 23:07:42 EST
What's the max memory upgrade configuration for these models?
best,
Gerry
SF
----- Original Message -----
From: "Michael Geary" <Mike_at_Geary.com>
To: "Jonathan Berry" <jberry_at_islandnet.com>; <thinkpad_at_stderr.org>
Sent: Saturday, December 07, 2002 3:48 PM
Subject: RE: [Thinkpad] Best Mem Config for 600
> > Model Maximum Memory
> >
> > 600 base + 2 x 128
> > 600E base + 2 x 256 (with some qualifications, see archives)
> > 600X base + 2 x 256
>
> I have run a TP600, 2645-51U with base + 1 x 128 + 1 x 256, for a total of
> 416MB RAM.
>
> I had to put the 128 and 256 pieces in a specific order--when swapped, it
> only saw 288MB. But once it got going, it worked completely reliably--I
used
> the machine to install a bunch of VMware virtual machines, which loads up
> memory pretty thoroughly, with no problems anywhere along the way.
>
> If I recall right, the 256Mb part was a Kingston 100MHz borrowed out of my
> A21p, and the 128Mb was an IBM 66MHz piece.
>
> -Mike
This archive was generated by hypermail 2.1.3 : Thu Jan 23 2003 - 09:59:43 EST