Re: [Thinkpad] 600 and dock 3

AAARRRGGGHHH!!!

You said it was a TP600 --that's a 600E BIOS!!!

Deanna
dberman@4dv.net

----- Original Message -----
From: "ron" <fidel@webcoast2coast.net>
To: "Deanna Berman" <dberman@4dv.net>
Sent: Monday, October 27, 2003 00:58 AM
Subject: Re: [Thinkpad] 600 and dock 3

> BIOS, 11/20/99 INET30WW
>
> Deanna Berman wrote:
>
> >What's the BIOS version?
> >
> >Deanna
> >dberman@4dv.net
> >
> >----- Original Message -----
> >From: "ron" <fidel@webcoast2coast.net>
> >To: "Deanna Berman" <dberman@4dv.net>
> >Cc: <thinkpad@stderr.org>
> >Sent: Sunday, October 26, 2003 15:18 PM
> >Subject: [Thinkpad] 600 and dock 3
> >
> >>Well the soggy sogga goes on, and on, and on! My wife's tp600 is working
> >>with the thinkpad config utility working. In it I turned the dock on and
> >>turned on the IDE controller on channel 3.
> >>But, when I boot I get a 174 error. a look at the book [HMM] tells me a
> >>drive is no good. setup shows the HDD in the dock grayed out. BUT! all
> >>cables are good and the 3 drives I tried work in other PCs. Is there a
> >>"Boot disk" to enable the dock IDE? the PCMCIA slots are there and working.
> >>
> >>I ran fdisk to see if they were there but not formatted. I used them on
> >>non ibm systems, never did fdisk and format on a IBM., I know on my TP i
> >>had to do that before the tp would see the HDD.
> >>Ron.

_______________________________________________
Thinkpad mailing list
Thinkpad@stderr.org
http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
Received on Mon Oct 27 03:38:54 2003