[Thinkpad] Re:TP 560 error beep?

From: <mahto_at_dslr.net>
Date: Sat Jul 09 2005 - 12:10:00 EDT

I would remove the CMOS battery, then after replacing it try booting again.
Isn't one, long beep a DIMM/RAM error?
The short beep may be irrelevant.

GL

>Hi,

I'm trying to find why an old 560 won't boot -- and there is nothing in
the hardware manual that covers this;

-- At power up, there is one long beep, then a short beep. -- That code
is not in the hardware manual.

-- It also gives a harddrive access lamp and the power lamp. Nothing
else.

-- I cannot access the BIOS.

--CMOS battery voltage is 3.0V 2.5 to 3.7 is normal.

--I took the harddrive out, and still get the same beeps, no boot.

--Reseated the LCD cable. Same beeps. No boot.

Its been sitting in a file case for a couple of years and worked the last
time it was booted. Any ideas on what I'm missing?

Thanks.<
_______________________________________________
Thinkpad mailing list
Thinkpad@stderr.org
http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
Received on Sat Jul 9 21:17:17 2005

This archive was generated by hypermail 2.1.8 : Fri May 26 2006 - 16:05:04 EDT