Re: [Thinkpad] Disappearing NIC *solved*

Now Bruce, be nice for a second.

That's a new "feature" that would have many of us flipping stumped, I'm
sure, at an inopportune moment.
Especially if the NIC would only recognize a connection to a powered hub.

Sounds like a further improvement on power management that no one knew
existed.

Deep Smart Power Down the Thoroughfare On a Sunny Day......

What a pain in the butt, Intel can be, at times. And when's the last time
anyone wrote a manual for a laptop that had documentation that good?

I'd a said worse, but now that Deadwood's been cancelled, I find that my
verbiage has somewhat improved.

Best to all.

Matt

----- Original Message -----
From: "Bruce Markowitz" <scosgt@worldnet.att.net>
To: "Jon Etkins" <jon@snikte.net>; <thinkpad@stderr.org>
Sent: Thursday, October 26, 2006 4:50 PM
Subject: Re: [Thinkpad] Disappearing NIC *solved*

> Just another case of RTFM
> ----- Original Message -----
> From: "Jon Etkins" <jon@snikte.net>
> To: <thinkpad@stderr.org>
> Sent: Thursday, October 26, 2006 5:45 PM
> Subject: Re: [Thinkpad] Disappearing NIC *solved*
>
>
>> Thanks to Mario and Bruce for their suggestions, which forced me to take
>> yet another look at the hardware settings. It turns out the culprit was
>> the "Deep Smart Power Down" setting, and a Google search for that term
>> lead me to the following item in the ReadMe from the latest ethernet
>> driver update for the T60:
>>
>> - (New) Deep Smart Power Down support for ThinkPad T60/T60p
>>
>> Deep Smart Power Down (DSPD)
>> ----------------------------
>> Deep Smart Power Down turns off the on-board Ethernet when link
>> is down or the network cable is disconnected. After a timeout
>> period, the Ethernet will power off. To the operating system,
>> this appears as a "hot-unplugged" Ethernet. When the network
>> cable is reconnected and link is restored, the Ethernet powers
>> up and functionality is fully restored. This appears as a
>> "hot-plugged" Ethernet. This function is available in Windows
>> XP and functions when the system is battery mode.
>>
>> DSPD information:
>> -----------------
>>
>> To disable DSPD,
>> ----------------
>> 1. Connect AC power to the system
>> 2. Open Device Manager
>> 3. Double-click Network adapters
>> 4. Double-click Intel(R) PRO/1000 PL Network Connection
>> 5. Click Advanced tab, Select Deep Smart Power Down, and
>> change the value to Disabled
>>
>>
>> Sure enough, with that setting disabled, the NIC never goes away, and
>> with it enabled the device magically appears and disappears if I connect
>> or disconnect a LAN cable while running on battery - actually quite a
>> cool feature that should help prolong battery life. Armed with that
>> knowledge, I'll probably leave it enabled most of the time.
>>
>> Caveats:
>>
>> What they *don't* tell you is that it only works if you're connected to
>> a hub, router, or switch - the NIC will not power on if it's connected
>> to another NIC via a crossover cable, which is exactly what I was trying
>> to do when I struck problems.
>>
>> And of course you have to remember to check the setting before leaving
>> your desk, because if all you have available on site is a crossover
>> cable and no AC adapter, there's no way to make the device reappear so
>> you can change the setting! Can you spell "catch-22," boys and girls?
>>
>> Cheers,
>> Jon.
>>
>> ________________________________________________________________________
>> Delivered using the Free Personal Edition of Mailtraq (www.mailtraq.com)
>> _______________________________________________
>> Thinkpad mailing list
>> Thinkpad@stderr.org
>> http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
> _______________________________________________
> Thinkpad mailing list
> Thinkpad@stderr.org
> http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
>

_______________________________________________
Thinkpad mailing list
Thinkpad@stderr.org
http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
Received on Thu Oct 26 18:15:34 2006